17 South Ridge Trail
Cartersville GA 30120
PH# 470-315-7373
Operating bands  10, 12, 17, 20, 40, 80 & 160 meters without a tuner.
Bandwidth 10m - 2000kHz, 20m - 500kHz, 40m - 400kHz, 80m 200kHz typical, (VSWR < 2.0:1)

(Max Operating power SSB
5000 Watt PEP
with a 50 % duty cycle
3000 Watt PEP with a 100% duty cycle
2000 Watt CW
1000 Watt  FT 8  and RTTY 

Typical impedance 40 ohm - 60 ohm (depending on installation height and configuration)
Gain 0.0 to 6 dBd
Effective Gain 12 dBi Typical (when mounted at 1 wavelength height)
VSWR 1.5:1 (typical)
Total length Dipole 266 feet.
OCF-5K160 Multi-Band 5KW Dipole
The OCF-5K160 dipole is the same as our OCF5K80 except with the addition of 160 meter coverage.  It is rated to take 5 KW.   It will work well on the 160, 80, 40 ,20, 17,12, and 10 meter ham bands with no need for tuning.
The antenna can be mounted as a dipole or inverted vee. It is complete, cut, tuned, and ready to hang.

The OCF-5K80 is complete with a 4 to 1  Balun.  It can be fed with standard 50 ohm coax . It is 266 feet long. 90 feet on one Leg and 176 feet on the other.

The antenna wire is composed of 2 conductors with 7 strands per side.
4 strands are copper and 3 strands are steel. The wire is rated at 200 lbs tensile strength.
This wire will not kink and is very easy to handle.

The Center insulator is made of quality schedule 40 PVC and Quality zinc plate eyebolts

For the size, weight and cost, I simply do not think there is a better performing antenna when the user is limited to a single or wire type antenna. Multi-band, high performance and high power handling, with utmost simplicity and ease of use. You will not be disappointed.
OCF-5K160 Multi-Band Dipole with External Maxcon Line Isolator
OCF-5K160 Only
RG8X Coax
Add RG8X coax to your antenna purchase.
All lengths come with PL259 connectors installed
RG8X 2 ft jumper to go between Isolator and balun $9.95