The OCF-200W80 is the same as all the other Maxcon OCF dipoles except it is designed for lower power levels. It will work well on the 80, 40, 20, 17,12, and 10-meter ham bands with no need for tuning. The antenna can be mounted as a dipole or inverted vee. It is complete, cut, tuned, and ready to hang.
The OCF-200W80 is complete with a 4 to 1 Balun. It can be fed with standard 50-ohm coax. It is 133 feet long. 45 feet on one Leg and 88 feet on the other.
The antenna wire is composed of 2 conductors with 7 strands per side. 4 strands are copper and 3 strands are steel. The wire is rated at 200 lbs tensile strength. This wire will not kink and is very easy to handle.
The Center insulator is made of quality schedule 40 PVC and Quality zinc plate eyebolts.
For the size, weight, and cost, I simply do not think there is a better-performing antenna when the user is limited to a single or wire-type antenna. Multi-band, high performance, and high power handling, with utmost simplicity and ease of use. You will not be disappointed.
Please Read Specifications Carefully
Operating bands 10, 12, 17, 20, 40 & 80 meters without a tuner.
Resonant Freq. on 80 meters is 3.6 MHz
Bandwidth 10m – 2000kHz, 20m – 500kHz, 40m – 400kHz, 80m 200kHz typical, (VSWR < 2.0:1)
Max Operating power SSB
200 Watt PEP with a 100 % duty cycle
100 Watt CW
100 Watt FT 8 and RTTY
Typical impedance 40 ohm – 60 ohm (depending on installation height and configuration)
Gain 0.0 to 6 dBd
Effective Gain 12 dBi Typical (when mounted at 1 wavelength height)
VSWR 1.5:1 (typical)
Total length Dipole 133 feet.